Areonauticcs Digger 3×3 Cheap Schematic (1.21.x) – Simple 3×3 Tunnel Digging Machine

Areonauticcs Digger 3×3 Cheap Schematic gives you a simple, low-cost digging machine for your world. It uses basic parts to mine a 3×3 tunnel through solid stone.

Features:

• Low Cost: Requires only 42 blocks to build.
• Tunnel Size: Digs a clean 3×3 hole when you place it at the edge of a block.
• Runs on basic water power using waterwheels at the back of the machine.
• Includes a clutch so you can stop the drills at any time.
• Has a gearshift so you can change the digging direction.
• Uses iron handles on the front and back so you can move the machine around easily.

Schematic Specs:

Minecraft1.21.x

Create Mod6.0.10

Dimensions9×3×2

Total Blocks42

Top Blocks Used

Belt 16Cogwheel 4Water 4Mechanical Drill 4Water Wheel 2

How to Use:

1. Place flowing water behind the waterwheels to start the machine.
2. Use the Gearshift to make the machine move forward.
3. Use the Clutch to stop the machine from moving and digging.
4. Grab the iron handles on the front or back to adjust its position.

🔧 Setup Notes:

Place flowing water at the back waterwheels.

Use Gearshift to change direction to front.

use Clutch to stop.

use iron handles in front and the back to move it around a bit.

Can dig a 3×3 hole when placed at the edges of the block.

Requirements:

Create Mod Required

simulated Required

Areonauticcs Digger 3×3 Cheap Schematic Download Links