Ocean Hammer Schematic (1.21.x) – Strong Ship for Towing Heavy Boats

Ocean Hammer Schematic gives you a slow but strong ship for your Minecraft world. This ship works perfectly for towing heavy trailers or pulling other boats across the water. You can steer it easily using a set of levers inside the control room. It adds a fun way to move large loads across oceans and rivers.

Features:

• Heavy Towing: This ship pulls heavy trailers and other boats across the water.
• The bridge has four different levers so you can steer the ship in any direction.
• Pull the far left lever to make the boat yaw to the left side.
• Use the second lever on the left to turn the ship left or spin it in place.
• Pull the far right lever to make the boat yaw to the right side.
• Use the second lever on the right to turn the ship right or spin it in place.
• The build contains 702 blocks and measures 34 blocks long, 12 blocks high, and 15 blocks wide.

Schematic Specs:

Minecraft1.21.x

Create Mod6.0.10

Dimensions34×12×15

Total Blocks702

Top Blocks Used

Copycat Slab 297Copycat Stacked Half Layer 49Copycat Byte 47Spruce Planks 36Polished Cut Deepslate 34

How to Use:

1. Place the ship in the water using the schematic file.
2. Find the missing wire connections inside the main cabin and hook them up.
3. Go to the bottom of the ship and connect the wires there too.
4. If you use a trailer, connect the wires between the ship and the trailer.
5. Walk to the bridge and pull the levers to start moving.

Screenshots:

Requirements:

Create Mod Required

copycats Required

createaddition Required

aeronautics Required

createdieselgenerators Required

Quark Mod Required

tfmg Required

simulated Required

farmersdelight Required

Create Connected Mod Required

Create Submarine Required

vsfluidlink Required

Ocean Hammer Schematic Download Links