Share if you like

Ender Tweaker Mod 1.12.2 is an interface between EnderIO and CraftTweaker, which supports adding/removing recipes from EnderIO machines.

Ender Tweaker mod for minecraft logo

Currently supported mods:

  • Alloy Smelter
  • Combustion Generator
  • Enchanter
  • SAG Mill
  • Slice’n’Splice
  • Soul Binder
  • The Vat
  • Tank

Documentation:

Individual documentation for machines is as follows:

Show Spoiler

Alloy Smelter (mods.enderio.AlloySmelter)

Recipe Addition:

addRecipe(IItemStack output, IIngredient[] input, @Optional int energyCost, @Optional float xp)
Parameters:

  • IItemStack output – The result of the recipe.
  • IIngredient[] input – The ingredients. Must be between 1 and 3 ingredients.
  • int energyCost – How much FE the recipe uses. Defaults to 5000.
  • float xp – The xp is granted from this recipe. May not be negative.
Recipe Removal:

removeRecipe(IItemStack output)
Parameters:

  • IItemStack output – The output of the recipe to remove.

removeByInputs(IItemStack... input)
Parameters:

  • IItemStack… input – The input of the recipe to remove.

Combustion Generator (mods.enderio.CombustionGen)

The combustion generator doesn’t support a concept of recipes. Instead, it uses Fuels and Coolants to determine how much FE will be generated.

Addition:

addFuel(ILiquidStack fuel, int powerPerCycleRF, int totalBurnTime)
Parameters:

  • ILiquidStack fuel – The fluid fuel to add.
  • int powerPerCycleRF – Amount of energy created per tick in a base-line machine.
  • int totalBurnTime – Total burn time of one bucket of fuel.

addCoolant(ILiquidStack coolant, float degreesCoolingPerMB)
Parameters:

  • ILiquidStack coolant – The fluid coolant to add.
  • float degreesCoolingPerMB – How much heat can one mB of the coolant absorb until it heats up by 1 K?
Removal:

removeFuel(ILiquidStack fuel)
Parameters:

  • ILiquidStack fuel – The fluid fuel to remove.

removeCoolant(ILiquidStack coolant)
Parameters:

  • ILiquidStack coolant – The fluid coolant to remove.

Enchanter (mods.enderio.Enchanter)

Recipe Addition:

addRecipe(IEnchantmentDefinition output, IIngredient input, int amountPerLevel, double costMultiplier)
Parameters:

  • IEnchantmentDefinition output – The output enchantment.
  • IIngredient input – The item that it used to make this enchantment.
  • int amountPerLevel – The number of input items per level of enchantment.
  • double costMultiplier – Used to modify how expensive the recipe is.
Recipe Removal:

removeRecipe(IEnchantmentDefinition output)
Parameters:

  • IEnchantmentDefinition output – The enchantment output of the recipe to remove.

SAG Mill (mods.enderio.SagMill)

Recipe Addition:

addRecipe(IItemStack[] output, float[] chances, IIngredient input, @Optional String bonusType, @Optional int energyCost, @Optional float[] xp)
Parameters:

  • IItemStack[] output – The results of the recipe.
  • float[] chances – The chance that this item appears. Must have the same length as output.
  • IIngredient input – The input.
  • String bonusType – This impacts how Grinding Balls work. May be NONE (no bonus), MULTIPLY_OUTPUT (can increase chance > 1.0), and CHANCE_ONLY (caps chance at 1.0).
  • int energyCost – How much FE the recipe uses. Defaults to 5000.
  • float xp – The xp is granted from this recipe. May not be negative.

addRecipe(WeightedItemStack[] output, IIngredient input, @Optional String bonusType, @Optional int energyCost, @Optional float[] xp)
Parameters:

  • WeightedItemStack[] output – The results of the recipe.
  • IIngredient input – The input.
  • String bonusType – This impacts how Grinding Balls work. May be NONE (no bonus), MULTIPLY_OUTPUT (can increase chance > 1.0), and CHANCE_ONLY (caps chance at 1.0).
  • int energyCost – How much FE the recipe uses. Defaults to 5000.
  • float xp – The xp is granted from this recipe. May not be negative.
Recipe Removal:

removeRecipe(IItemStack input)
Parameters:

  • IItemStack input – A valid input item of the recipe to remove.

Slice’n’Splice (mods.enderio.SliceNSplice)

Recipe Addition:

addRecipe(IItemStack output, IIngredient[] input, @Optional int energyCost, @Optional float xp)
Parameters:

  • IItemStack output – The result of the recipe.
  • IIngredient[] input – The ingredients. Must be between 1 and 6 ingredients.
  • int energyCost – How much FE the recipe uses. Defaults to 5000.
  • float xp – The xp is granted from this recipe. May not be negative.
Recipe Removal:

removeRecipe(IItemStack output)
Parameters:

  • IItemStack output – The output of the recipe to remove.

Soul Binder (mods.enderio.SoulBinder)

Recipe Addition:

addRecipe(IItemStack output, IIngredient input, String[] entities, int xp, @Optional int energyCost)
Parameters:

  • IItemStack output – The result of the recipe.
  • IIngredient input – The main (non-soul vial) ingredient.
  • String[] entities – Allowed entities that must be present in a soul vial for this recipe to work.
  • int xp – The XP cost of this recipe, in levels.
  • int energyCost – How much FE the recipe uses. Defaults to 5000.
Recipe Removal:

removeRecipe(IItemStack output)
Parameters:

  • IItemStack output – The output of the recipe to remove.

The Vat (mods.enderio.Vat)

The Vat uses a system of multipliers to calculate output. This means each pair of inputs will use a different amount of input. The ratio of input -> output fluid is constant. The multipliers on the inputs determine how much input fluid is used.slot1Mult * slot2Mult * 1000mB of input is used per craft. The final output amount is calculated from inMult * slot1Mult * slot2Mult * 1000mB. The ratio of input to output fluid is equal to inMult.

Recipe Addition:

addRecipe(ILiquidStack output, float inMult, ILiquidStack input, IIngredient[] slot1Solids, float[] slot1Mults, IIngredient[] slot2Solids, float[] slot2Mults, @Optional int energyCost)
Parameters:

  • ILiquidStack output – The output fluid (right tank). Amount is ignored.
  • float inMult – The multiplier of the input fluid. Changes how much output is created.
  • ILiquidStack input – The input fluid (left tank). Amount is ignored.
  • IIngredient[] slot1Solids – Items that can go in slot 1.
  • float[] slot1Mults – The multipliers for the items in slot 1. Must be the same length as slot1Solids. Changes how much output is created and how much input is used.
  • IIngredient[] slot2Solids – Items that can go in slot 2.
  • float[] slot2Mults – The multipliers for the items in slot 2. Must be the same length as slot2Solids. Changes how much output is created and how much input is used.
  • int energyCost – How much FE the recipe uses. Defaults to 5000.
Recipe Removal:

removeRecipe(ILiquidStack output)
Parameters:

  • ILiquidStack output – The output of the recipe to remove.

Tank (mods.enderio.Tank)

Recipe Addition:

addRecipe(boolean fill, IIngredient input, ILiquidStack fluid, IItemStack output)
Parameters:

  • boolean fill – If true, the fluid passed will be consumed when the recipe is processed. If false, the fluid will be added to the tank.
  • IIngredient input – The input item.
  • ILiquidStack fluid – The relevant fluid. Operation is determined by fill.
  • IItemStack output – The output of the recipe.
Recipe Removal:

removeRecipe(boolean fill, ILiquidStack fluid, IItemStack output)
Parameters:

  • boolean fill – If this recipe is a filling recipe.
  • ILiquidStack fluid – The fluid involved in this recipe.
  • IItemStack output – The output of the recipe to remove.

Screenshots:

Ender Tweaker mod for minecraft 01

Ender Tweaker mod for minecraft 02

Ender Tweaker mod for minecraft 03

Ender Tweaker mod for minecraft 04

Ender Tweaker mod for minecraft 05

Ender Tweaker mod for minecraft 06

Ender Tweaker mod for minecraft 07

Ender Tweaker mod for minecraft 08

Ender Tweaker mod for minecraft 09

Ender Tweaker mod for minecraft 10

Requires:

Minecraft Forge

Ender IO

CraftTweaker

How to install:

How To Download & Install Mods with Minecraft Forge

How To Download & Install Fabric Mods

Don’t miss out today’s latest Minecraft Mods

Ender Tweaker Mod 1.12.2 Download Links:

For Minecraft 1.12.2

Download from Server 1 – Download from Server 2

Click to rate this post!
[Total: 1 Average: 5]

Share if you like